Application: | High-performance Transducer, Three Phase Transducer, General Transducer, High Frequency Converter Transducer |
---|---|
Output Type: | Triple |
Principle of Work: | Vector Control Transducer |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Series | Model | Input Voltage | Input | Output | Motor |
current (A) | current (A) | Power (kW) | |||
ALPHA6000E | 3R75GB | Three-phase 380V | 3.7 | 2.5 | 0.75 |
31R5GB / 31R5PB | 5.4 | 4 | 1.5 | ||
32R2GB / 32R2PB | 7 | 6 | 2.2 | ||
3004GB / 3004PB | 10.7 | 9 | 4 | ||
35R5GB / 35R5PB-N | 15.5 | 13 | 5.5 | ||
37R5GB / 37R5PB-N | 20.5 | 17 | 7.5 | ||
3011GB / 3011PB-SJ | 26 | 25 | 11 | ||
3015GB / 3015PB-SJ | 35 | 32 | 15 | ||
3018G / 3018P-SJ 3018GB / 3018PB-SJ |
38.5 | 37 | 18.5 | ||
3022G / 3022P-SJ 3022GB / 3022PB-SJ |
46.5 | 45 | 22 | ||
3030G / 3030P-N | 62 | 60 | 30 | ||
3037G/3037P-N 3037GB/3037PB-N |
76 | 75 | 37 | ||
3045G/3045P-N 3045GB/3045PB-N |
92 | 90 | 45 | ||
3055G/3055P-N 3055GB/3055PB-N |
113 | 110 | 55 | ||
3075G/3075P-N 3075GB/3075PB-N |
157 | 152 | 75 | ||
3093G/3093P-N | 180 | 176 | 93 | ||
3110G/3110P-N | 214 | 210 | 110 | ||
3132G/3132P-N | 256 | 253 | 132 | ||
3160G/3160P-N | 307 | 304 | 160 | ||
3185G/3185P-N | 350 | 342 | 185 | ||
3200G/3200P-N | 385 | 380 | 200 | ||
3220G/3220P-N | 430 | 426 | 220 | ||
3250G/3250P-N | 500 | 480 | 250 | ||
3280G/3280P-N | 548 | 520 | 280 | ||
3315G/3315P-N | 625 | 600 | 315 | ||
3355G/3355P-N | 710 | 680 | 355 | ||
3400G/3400P-N | 760 | 750 | 400 | ||
3450G/3450P-N | 830 | 820 | 450 | ||
3500G/3500P-N | 910 | 900 | 500 | ||
3560G/3560P-N | 970 | 950 | 560 | ||
3630G/3630P-N | 1070 | 1050 | 630 |
Single Phase Input:200~240V,Three Phase Input:380~480V,50/60Hz | ||||
Inverter Model |
Adapted motor | Rated output current(A) | Frame |
|
KW | HP | |||
EA200-S2R75M | 0.75 | 1 | 4 | E00M |
EA200-S21R5M | 1.5 | 2 | 7 | E00M |
EA200-3R75M | 0.75 | 1 | 2.5 | E00M |
EA200-31R5M | 1.5 | 2 | 3.7 | E00M |
EA200-32R2M | 2.2 | 3 | 5.1 | E00M |
Single Phase Input:200~240V,50/60Hz | ||||
Inverter Model |
Adapted motor | Rated output current(A) | Frame |
|
KW HP | ||||
EA200-S2R75G | 0.75 | 1 | 4 | E00 |
EA200-S21R5G | 1.5 | 2 | 7 | E00 |
EA200-S22R2G | 2.2 | 3 | 10 | E01 |
EA200-S2004G | 4.0 | 5 | 18 | E01 |
Three Phase Input:380~480V,50/60Hz | ||||
Inverter Model |
Adapted motor | Rated output Current(A) | Frame |
|
KW | HP | |||
EA200-3R75G | 0.75 | 1 | 2.5 | E00 |
EA200-31R5G | 1.5 | 2 | 3.7 | E00 |
EA200-32R2G | 2.2 | 3 | 5.1 | E00 |
EA200-3003G | 3 | 4 | 6.6 | E01 |
EA200-3004G | 4 | 5 | 8.5 | E01 |
EA200-35R5G | 5.5 | 7.5 | 13 | E01 |
EA200-37R5G | 7.5 | 10 | 16 | E02 |
EA200-3011G | 11 | 15 | 25 | E02 |
EA200-3015G | 15 | 20 | 32 | E03 |
EA200-3018G | 18.5 | 25 | 38 | E03 |
EA200-3022G | 22 | 30 | 45 | E04 |
EA200-3030G | 30 | 40 | 60 | E04 |
EA200-3037G | 37 | 50 | 75 | E05 |
EA200-3045G | 45 | 60 | 90 | E05 |
EA200-3055G | 55 | 70 | 110 | E06 |
EA200-3075G | 75 | 100 | 150 | E07 |
Series | Model | Input Voltage | Power capacity (kVA) | Input current | Output current (A) | Moter power(kW) |
A1 | S2 R4GB | Single-phase 200V~240V 50/60Hz |
1.0 | 5.1 | 2.3 | 0.4 |
S2R75GB | 1.7 | 9.2 | 4.0 | 0.75 | ||
S21R5GB | 2.8 | 13.1 | 7.0 | 1.5 | ||
S22R2GB | 4.0 | 23 | 9.6 | 2.2 | ||
3R75GB | Three-phase 380Vto480V 50/60Hz |
1.6 | 3.7 | 2.1 | 0.75 | |
31R5GB | 3.2 | 5.4 | 3.8 | 1.5 | ||
32R2GB | 4.8 | 7.0 | 5.1 | 2.2 | ||
3004GB | 6.0 | 10.7 | 9.0 | 4.0 |
Type | Terminal No | Name | Terminal Funciton | Specification |
Analog Input | AI1~AI2 | Analog inputs | Receive voltage/current input. Voltage or current are selected by DIP switch SW3 or SW1. Voltage input mode is the default mode. | Input voltage: 0~10V |
Input current: 0~20mA | ||||
Reference ground: GND | ||||
AO/AO1 | Analog output | Be able to output analog voltage/current. Voltage or current are selected by DIP switch SW2. | Output voltage: 0/2~10V | |
Output current: 0/4~20mA | ||||
Reference ground: GND | ||||
Analogy Output | AO2 | Analog output | Provide analog voltage/current output, with voltage and current selected by the DIP switch SW5. | Output voltage: 0/2~10V |
Output current: 0/4~20mA | ||||
Reference ground: GND |
Type | Terminal No | Name | Terminal Funciton | Specification |
Commu- nication | 485+ | RS485 interface | 485 differential signal positive terminal | Standard RS-485 communication interface, Not isolated to GND |
485- | 485 differential signal negative terminal | |||
Multi- Functional Input Terminal |
X1~X6 | Multi-function input terminals | It can be defined as a multi-function discrete input terminal through programming. | Optical-isolator input |
Input resistance: R=3.9kΩ | ||||
Input voltage: 0~30V | ||||
Reference ground: COM | ||||
Multi_x001f_Function Output | DO | Open collector output terminal | It can be defined as a multi-function output terminal for pulse signal through programming. It can also be used as an on-off output terminal. | Opto-coupler isolated OC output. |
operating voltage: 0V~26V | ||||
Maximum current: 50mA | ||||
Output frequency: 0~50kHz | ||||
Reference ground: COM | ||||
Electric Replay Output | TA | Relay output | It can be defined as a multi-function relay output terminal through programming. | TA-TB: NC TA-TC: NO Contact capacity: 250VAC/2A (COSΦ=1.0) 250VAC/1A (COSΦ=0.4) 30VDC/1A |
TB | ||||
TC | ||||
RA | Relay output | RA-RC: NO Contact Capacity: 250VAC/2A (COSΦ=1) 250VAC/1A(COSΦ=0.4) 30VDC/1A |
||
RC | ||||
PLC | Multifunctional input common terminal | When leaving the factory, it is shorted to 24V, and the PLC is internally isolated from 24V. Note: When using PLC, the SW4 jumper on the right side of the control terminal must be disconnected. |
X terminal supports NPN and PNP connection methods. | |
Power | 10V | +10V power supply | Provide +10V power supply externally (Reference ground: GND) |
Maximum output current 20 mA Open circuit voltage can be up to 12V |
24V | +24V power supply | Provide +24V power supply externally (Reference ground: COM) |
Maximum output current 100mA | |
GND | +10V Reference GND | Reference GND for analog signal and +10V power supply | Inner Isolated from COM COM for +10V, AI1, AI2, and AO1 |
|
COM | +24V Common GND | Used with other terminals | Isolated from GND | |
PE | Shield ground | It is used for grounding of terminal wiring shield layer. Shield layer of analog signal lines, 485 communication lines, and motor cables can be connected to this terminal | It is internally connected to connection terminal PE of main circuit. |
Subject | Specification |
Rated input voltage, frequency | 3 Phase 380V-440V, 50/60Hz |
Allowed input voltage working scope | 3 Phase 380V: 304V-456V, Voltage imbalance rate less than 3%, frequency less than +-5% |
Rated output voltage | 0~Rated input voltage |
Maximum overload current | Type G, 150%/min, 180%/20Sec. Type P, 120%/min, 150%/sec |
Control mode | VF/Current vector control |
Frequency controlling scope | Low frequency mode : 0.00-650.00Hz, High frequency mode: 0.0~1000Hz |
Frequency accuracy | Digital command: ±0.01 %(-10°C~ +40°C) Analog command: ±0.01 %(15°C~35°C) |
Set frequency resolution | Digital command: 0.01 Hz Analog command: 1/1000 maximum frequency |
Output frequency resolution | 0.01 Hz |
Frequency setting signal | 0~10V, 0~20mA |
Accelerating time | 0.1-3600 Seconds |
Braking torque | Additional braking torque up to 125% |
Voltage / Frequency features | 4 optional fixed VF features , and random VF feature setting with RG VF control |
Protection | Over-voltage, Under-voltage, Current Limit, Over-current, Overload, Electronic thermal relay , Over-heat, over-voltage with stall, short circuit load, touch ground, under-voltage protection, input default phase, output default phase, short circuit of touch ground or phases, motor overload protection, etc. |
Ambient temperature | -10°C~40°C |
Humidity | 5-95% RH |
Storage | Storage-40°C~70°C |
Working condition | Indoor without corrosive gas. |
Installation | Altitude not higher than 1000 Meters without dust, corrosive gas and sunlight direct radiation |
Vibration | Less than 5.9m/s2(0.6g) |
Protection level | lp20 |
ses
Series | Model | Input Voltage | Input | Output | Motor |
current (A) | current (A) | Power (kW) | |||
ALPHA6000E | 3R75GB | Three-phase 380V | 3.7 | 2.5 | 0.75 |
31R5GB/31R5PB | 5.4 | 4 | 1.5 | ||
32R2GB/32R2PB | 7 | 6 | 2.2 | ||
3004GB/3004PB | 10.7 | 9 | 4 | ||
35R5GB/35R5PB-N | 15.5 | 13 | 5.5 | ||
37R5GB/37R5PB-N | 20.5 | 17 | 7.5 | ||
3011GB/3011PB-SJ | 26 | 25 | 11 | ||
3015GB/3015PB-SJ | 35 | 32 | 15 | ||
3018G/3018P-SJ 3018GB/3018PB-SJ | 38.5 | 37 | 18.5 | ||
3022G/3022P-SJ3022GB/3022PB-SJ | 46.5 | 45 | 22 | ||
3030G/3030P-N 3030GB/3030PB-N | 62 | 60 | 30 | ||
3037G/3037P-N 3037GB/3037PB-N | 76 | 75 | 37 | ||
3045G/3045P-N 3045GB/3045PB-N | 92 | 90 | 45 | ||
3055G/3055P-N 3055GB/3055PB-N | 113 | 110 | 55 | ||
3075G/3075P-N 3075GB/3075PB-N | 157 | 152 | 75 | ||
3093G/3093P-N 3093GB/3093PB-N | 180 | 176 | 93 | ||
3110G/3110P-N | 214 | 210 | 110 | ||
3132G/3132P-N | 256 | 253 | 132 | ||
3160G/3160P-N | 307 | 304 | 160 | ||
3185G/3185P-N | 350 | 342 | 185 | ||
3200G/3200P-N | 385 | 380 | 200 | ||
3220G/3220P-N | 430 | 426 | 220 | ||
3250G/3250P-N | 500 | 480 | 250 | ||
3280G/3280P-N | 548 | 520 | 280 | ||
3315G/3315P-N | 625 | 600 | 315 | ||
3355G/3355P-N | 710 | 680 | 355 | ||
3400G/3400P-N | 760 | 750 | 400 | ||
3450G/3450P-N | 830 | 820 | 450 | ||
3500G/3500P-N | 910 | 900 | 500 | ||
3560G/3560P-N | 970 | 950 | 560 | ||
3630G/3630P-N | 1070 | 1050 | 630 |
Q&A:
Q1: Can I have a sample order?
A1: Yes, we welcome sample order to test and verify the performance and quality. Mixed samples are acceptable too.
Q2: Do you have any MOQ limit?
A2: NO MOQ. Please just send us inquiry, your inquiry will be replied within 24 hours, we will let you know the latest price.
Q3: What is the lead time?
A3: Samples take 1-3 days; For quantities less than 200 pieces, the lead time is 14 days; For bulk orders more than 200 pieces, the lead time is about 30 days depends on the actual situation of the production line.
The lead time may vary depends on the models.
Q4: How do you ship the goods and how long does it take to arrive?
A4: We usually ship by DHL, UPS, Fedex, TNT, EMS, etc. It takes 3-30 days to arrive depends on the regions and courier. Shipping by air and sea are both available.
You may also use your own freight forwarding agent for shipping.
Q5: Do you offer warranty for the products?
A5: Yes, we offer 90 days for exchange, 18 months warranty, and life time technical support and maintenance.
Suppliers with verified business licenses